Measurement Forum Archive

Read-only historical archive of measure.infopop.cc

Measuring tape recommendations

#1 • 8/28/17 @ 1:52 PM
Does anyone have a suggestion for a good steel tape to be used for calibration courses? This arises because a measurer I've been working with wants to buy a tape, he asked me for advice and pointed me to one he had found online. But I got the feeling it might be one of those really lightweight ones that would be flying all around in a moderate wind. Looking online I get the feeling that fewer and fewer companies are producing tapes (?).
#2 • 8/28/17 @ 2:39 PM
Bob, two years ago I bought a fine tape: Starrett 30 m tape. It comes with a Letter of Certification which says that the overall length, at a temperature of 68 F with a tension of 10 pounds will have an error of less than 2.5 mm in 30 m. I assume you can search for this. I don't have a record of where I purchased it but it was online.
#3 • 8/29/17 @ 9:49 AM
Steel tapes, that are traceable to a national standard, are somewhat rare. I purchased the Starrett Certified Tape Rule, 30 meters Blade Length, 3/8" Blade Width, with Certificate, (product 1936A4) in 2015, for $70.62 from McMaster-Carr.

https://www.mcmaster.com/#1936a4/=195ir5o

Unless required, I would avoid using a certified steel tape for casual measuring. Hope this helps. -- Justin