Measurement Forum Archive

Read-only historical archive of measure.infopop.cc

a good question?

#1 • 11/20/15 @ 12:13 PM
Last Sunday I held a measurement clinic for some members of the Oregon Road Runners Club. We discussed calibration courses and I mentioned that they should be on fairly level ground. One of the participants then asked "well if the race course is hilly shouldn't the calibration course be hilly too"? I thought that was a very good questions for which I had no answer.

Do you?
#2 • 11/20/15 @ 12:30 PM
I would try to use a Calibration Course on a level street. The hills would probably balance out over the long haul.

Now if the course is totally downhill, the it may be best to use a downhill Cal Course.
#3 • 11/20/15 @ 2:51 PM
If you looked at a calibration course that had a 2 meter rise and fall over its 300 meter distance, you would probably perceive it as being almost flat. That equates to a 5k with 50 meters of total climb, which most people would consider to be moderately hilly.
A 5k with a rise and fall of 100 meters would be considered very hilly, and yet a cal course with a rise and fall of 4 meters would be perceived as having only a slight rise in the middle.
My point is that you don't have to deviate much from flat in a calibration course to be equivalent to a "very hilly" race course. And that many "flat" calibration courses probably already have a rise and fall of a meter or two.