Measurement Forum Archive

Read-only historical archive of measure.infopop.cc

Guidelines on use of IR thermometer

#1 • 11/12/15 @ 9:21 AM
A measurer recently wrote me asking about the use of IR (infrared) thermometers and I thought I'd post his question and observations to see what those in the wider measurement community had to say:
quote:
Are there specific USATF measurement guidelines on use of an IR thermometer?
I ask because I still see 'thermometer shaded from direct sun' on the form for steel taping a cal course, and 'To correct your taped distance for temperature, set out a thermometer on the pavement and shaded from the sun.' on the guidelines on http://www.usatf.org/Products-...ibration-Course.aspx
I know that pavement temp should ideally be recorded in shade. I have found myself to be in sunny areas where there is no or very limited shade (the sun is currently shading an area in the shadow of a TP, but it had been warming it previously). I also know that different colors of pavement will absorb more solar radiation and convert it to heat, then register higher temps. There is always the rhetorical question of how far from the measurement area one goes to record a temp in the shade.
Two days ago, I saw IR thermometer temps ranging from 47 to 73 in different parts of the roadway with different degrees of pavement darkness, in sun and in shade. To me, this amount of variability seems to have the potential to throw things off and I am wondering what your readings, communications, and experience have taught you in this regard.
#2 • 11/14/15 @ 2:47 PM
I use an open reel steel tape. As soon as I wind up the tape I check it at several places around the reel with my IR thermometer. For temperature correction, I use the avg. reading. On a warm sunny day the tape has read over 120F.
BTW, the steel tape measured like this is usually about 5 degrees cooler than the roadway.
#3 • 11/14/15 @ 8:45 PM
This reminds me of a question. Somewhere in IAAF regs about tracks they mention a "contact thermometer" to be used to measure the temperature of a steel tape. Does anyone know what that is?