I went with a 4-stroke because I understand 4-strokes better than two, and I like the puckety-puckety sound. And they have better torque, to haul my big butt around.
Supposedly, it comes with everything I'll need in one convenient box. But that box is in California, and it's too heavy to ship fast economically. So I'll have to wait a week or so for it to arrive. Meanwhile, I prepare the bike:
First step is to replace the seat with something more comfy. That hard rock is the main reason I haven't ridden in so long. But this one is super cushy and has springs. This alone makes the project worth it.
Next, I got rid of the GripShift levers, because the kit comes with a throttle/kill switch for the engine and they'd be in the way. Plus, I don't need 18 speeds now; 3 will suffice. I bought a new Shimano lever shifter for the front chainwheel. It works much better than the GripShifts ever did.
Out back, I cut the cable and crimped off the end to fix the derailleur in an intermediate gear. A little crude, but it should suffice. Installed new inner tubes and took it for a spin, just to see if I still knew how. Did not fall off.
So this is where the project stands, for now. I will have to replace the cranks with the wide crankset that may or may not come in the kit.
Now, If I wanted to make this a dedicated sickle, I could have removed the crank and chain altogether, and put some foot pegs down there. But I like the idea of being able to pedal it if I run out of fuel or can't start it for whatever reason.
Bikeberry says this should be good for 35mph, although that's probably with some skinny kid riding. It will likely be fast enough.
I suppose a helmet is in order, too. So add that to the shopping list.
sturiegel#2 • 11/16/14 @ 4:33 AM
Also, I have a JR counter somewhere. Will add that to the front wheel as soon as I find it.
loganburgess#3 • 11/16/14 @ 7:25 PM
How much weight does the kit add to the bicycle? I looked on the website and didn't see anything.
sturiegel#4 • 11/17/14 @ 2:39 AM
A very good question.I'm going to guess and say 20 pounds, but I'll know for sure when it arrives.
peteriegel#5 • 11/17/14 @ 2:41 AM
A search of some of the add-on engine sites reveals that a 49 cc 4-stroke engine weighs 7 kg (15lb) while the whole kit will add about 20 lb.
Those wondering how to install can check out online videos at:
Now that we've got a perfectly good bike, it's time to mess it up. Start by putting it on a workstand. Nothing fancy, just some re-purposed bits of 2x4. This makes things a hell of a lot easier.
So today I learned that cranks are no fun at all to remove. It took a disturbing amount of brute force to get them off, but they yielded in the end. While I was down there I re-greased the crankpin, just because. I also learned that bike makers love reverse threads. The pedals came off the cranks a lot easier once I figured that one out.
So, now for engineering: I want a headlight, just because it seems like a good idea. I had a big-rig backup light from my over-the-road days, and I had a battery holder from an RC truck:
I drilled a hole in the back and screwed it to the front reflector bracket. Easy as.
I thought about a fancy toggle switch, but decided to keep it simple. Plug in the battery, it lights up. Sort of.
Well at least I won't blind any oncoming drivers, but I might get their attention. If I want more light I can use a 3-cell lipo for 12 volts, as long as I don't discharge it too much. They don't like that.
I also put some split plastic wire loom over the wires, because that brake cable was eyeballin' the wires, looking to chafe through and make things interesting.
And now we wait for the engine, unless I think of other improvements.
kevinplucas#7 • 11/18/14 @ 7:57 AM
I really like the idea of a motorized bicycle. Especially when measuring a course with steep grades. On a motorized bicycle I could stop fretting over which direction is easier to measure a hilly road course, start to finish or finish to start. Just hop on the bike and go. You definitely lose any exercise benefits of measuring.
Pete Riegel and Mike Wickiser’s post “A Last Minute Measurement” and now Stu Riegel’s post about building a motorized bicycle started me thinking about the motorized bicycle idea. Could a motorized bicycle really work for course measuring? What additional distractions measuring with a motorized bicycle might bring?
Not having too much success with small 2 cycle engines, the thought of getting the gas mixture correct for the break in period and after would certainly distract me while measuring. Sure would hate to get the mix wrong and stall in the middle of a measurement. The added possible mechanical motor problems are beyond my expertise. Mechanical problems on a bicycle I can handle.
The most important obstacle I just discovered; motorized bicycles can NOT be registered in NY or operated on streets. I know the thought of the Town or City police pulling up to issue me traffic ticket would have me repeatedly looking over my should rather than the road ahead.
A motorized bicycle is a nice idea, but not for me here in NY. Besides I need the exercise and enjoy it too much despite those occasional steep hills.
sturiegel#8 • 11/18/14 @ 12:35 PM
Definitely check state laws before riding! I'm okay here in Ohio, as my commercial driver's license lets me drive just about anything.
Hills will definitely be more fun with some assistance. There's a very nice park right around the corner from me, but the hill to get there is very steep.
Didn't get much done today other than greasing the wheel bearings, but I did find out that the kit is on its way. Woohoo!
peteriegel#9 • 11/19/14 @ 8:13 AM
Son Stu became infected by Mike’s posting about his motorized bike, and is posting his progress. I also caught the bug, and I have ordered a new bike and engine, from the same source as Stu bought his.
The bike is a 26 inch old style bike with one speed and fat tires, and a coaster brake. It’s the sort of bike I used to call a paper-boy bike.
The engine is a two-stroke, supposed to fit the bike nicely. I don’t have a problem mixing gas and oil. I used to drive a Saab 96, a three-cylinder two-stroke car. I liked it a lot. A quart of oil went into the tank with every 8 gallon gas fill.
I wanted fat tires on the bike for their shock-absorbing capability. And I did not need gears – after all, the engine will be doing the work.
Should be a fun project putting it together, and maybe the winter will melt away for a day or two enroute to spring.
I’d considered myself retired from course measurement, as the fatigue of riding got in the way of my thinking. Perhaps the desire will become re-ignited – who knows?
If no future measurement looms, I do make frequent trips to the library (2 mile round-trip) and the Post Office (3 mile round trip, with an uphill on the way home).
I doubt I’ll be doing a step-by-step account of the project unless something weird happens.
Nothing to do now but wait for two heavy boxes to be delivered.
sturiegel#10 • 11/22/14 @ 3:36 PM
You shouldn't have to wait long. My big box came today! And now for the long-awaited update! I got a big box today, and hurried to unpack it. Inside was an engine and other assorted goodies:
I couldn't resist popping the valve cover off to have a look at the cutest little rocker arms you ever saw:
Then I got busy bolting it all together. I figured a single cylinder would have some vibration, so I took the time to Loctite everything. First step was to put the engine plate on:
Since it's a splash-lube engine you want it to sit level. I measured the top-tube angle with the bike on the ground, then matched that angle by rotating the hooks on the stand. Once the plate was leveled, I had to grind off my water-bottle mount so it would fit flush to the frame.
The rest of the installation was pretty obvious. Everything really only goes together one way, so it's hard to screw it up. The rear sprocket installation was fiddly, just because you're working around and through the spokes. Then I got in a building groove and quit taking pictures, until I got this far:
Notice there's a bit missing. I found age cracks in the tires, and decided on some new bars for a more relaxed, upright riding position. I did get rid of the lawn-implement air cleaner in favor of an open-element model, just because. And of course the tires and bar ain't here yet. And until they get here there's not much I can do. Except, of course, start the engine.
IT'S ALIVE!
Now I wait some more.
peteriegel#11 • 11/23/14 @ 3:04 AM
Looks like good stuff, and fun to put together! My bike and motor kit are scheduled for delivery November 25. Unfortunately I seem to also need a "JNM Vibration Motor Mount, and that is presently out of stock - but expected to be available "soon."
I'm expecting to have to do some waiting, but hoping for the best. Meanwhile, there will be some assembly to do.
I'll be using Loctite too.
sturiegel#12 • 11/23/14 @ 4:54 AM
Well, I hope you don't have to wait too long. Waiting for parts is the worst part of any project. I like to start and work til I'm tired, instead of stopping when I can't go any farther.
Early-morning mods:
The grips that come with the kit (left) are shiny aluminum, which is a terrible thing to have to grip. Ace bandage to the rescue! You'll need a looooong screwdriver to get the end caps off and on.
The Ace bandages should absorb both vibration and sweat, and won't heat up in the sun like the aluminum grips.
sturiegel#13 • 11/24/14 @ 9:56 AM
Anyone who knows me at all knows that I love old stuff. And sometimes new stuff that looks old. And since this project is very much like what early 1900's motorsickles were, I figured I'd dress it up as one. Why not, it's a motorized bike. Why take it seriously?
It's been said that empty bottles bring on inspiration...
... and so it happens. Single-malt Scotch, a buffalo gun and a motorsickle. My kind of party.
bobthurston#14 • 11/25/14 @ 7:21 AM
Looks like you may want to exercise some caution when coming to a stop and getting off the seat. Maybe save the scotch until after the ride I guess.
sturiegel#15 • 11/25/14 @ 2:41 PM
One of the things I did but didn't write about was cut down the seat post. So now I can just drop a leg when I come to a stop, just like a real motorcycle. It makes it harder to pedal, but maybe I won't have to do that.
bobthurston#16 • 11/25/14 @ 6:13 PM
Yeah unless you run out of gas like Mike W talked about!
Just thinking about this raises a whole lot of questions maybe you or others can answer. - How does the transmission work on this device? - Is there a separate chain from the motor to rear wheel gears? - Can you pedal AND use motor at the same time or is it either-or? - How does this compare to the bikes that have an electric motor and a battery? - What if someone wanted to buy a motorbike, or motor scooter? Is that an alternative to using a kit, or would it just be impossible to fit a counter on one of those vehicles?
Just wondering.
peteriegel#17 • 11/26/14 @ 1:38 AM
Questions about how the motorized bike works are best answered by referring to the supplier's web page at
There are other places that sell these things but I am not familiar with them.
Because they sell both 4-stroke and 2-stroke engines, there are lots of things to consider.
Installation videos may be seen at the site, and they are helpful.
Mike and Stu elected to mount their engines on bikes they already had, while I ordered a new bike.
sturiegel#18 • 11/26/14 @ 3:30 AM
quote:
Originally posted by Bob Thurston: Just thinking about this raises a whole lot of questions maybe you or others can answer. - How does the transmission work on this device? - Is there a separate chain from the motor to rear wheel gears?
There's a separate chain from the transmission to the rear wheel. If you want to go really fast, there's a jackshaft kit available that sends the power thru the bike's gearing.
The transmission has a freewheel (one-way clutch) so it's only engaged when sending power to the wheel. If you want to pedal, it doesn't add too much drag.
quote:
- Can you pedal AND use motor at the same time or is it either-or?
It appears you can use both. You would provide a marginal amount of assistance.
quote:
- How does this compare to the bikes that have an electric motor and a battery?
E-bikes are more expensive, but lighter and somewhat more complicated. They typically use a motor in the wheel hub and a more sophisticated electronic throttle. A gas bike can be "recharged" at any gas station, though.
quote:
- What if someone wanted to buy a motorbike, or motor scooter? Is that an alternative to using a kit, or would it just be impossible to fit a counter on one of those vehicles?
I don't think a counter would work on those. The brakes would get in the way. Not to say you couldn't rig a counter somehow, but it would take some trial and error.
Speaking of trial and error, I figured out my chain guard. Pics later.
sturiegel#19 • 11/26/14 @ 4:22 AM
And now for the "how the heck am I gonna" part of our program.
The chain guard included in the kit was no way, no how going to fit on my bike. I thought about doing without, but I can see its primary function is to keep the output sprocket from flinging grease all over my leg, and I have quite enough of that already.
My usual method is to stare at it intently, test-fit parts, mull over some ideas and then go do something else, so the goblins in the back room can think it over. Then when I least expect it, a solution comes slowly to the surface, like a corpse in a pond. And then I have no alternative but to get right on it.
So here's how that chain guard is going on:
Pure freakin' butchery. First I hacked away at the guard until it fit the frame and the output shaft, then bent up some 1/8 piano wire to make a stay that mounts to a heatshield screw and the rear rack mount. Then I brazed the piano wire to the guard.
I used a chain link to mount at the rear, rather than wrapping the wire. Hey, it's one way to clean up the shop.
The rear of the guard will just be safety-wired to the frame.
sturiegel#20 • 11/27/14 @ 3:03 AM
So here's me being picky: The drive chain will either be too short, or so long that I'll need to take up a bunch of slack with the tensioner. The difference is one tooth on the sprocket. Since I'm waiting for parts anyway, I opted for too short, and made up the difference with a half-link:
Now the chain can wrap properly.
Here's another little problem-solver:
My rear brake cable is routed over the top tube, right where the tank is. I could probably snake it thru the tank mounts, but I don't like the idea of a cable chafing the bottom of the tank. So I bent up a piece of brake line to run the cable thru.
You can also see where I re-located the battery for the headlight. It swivels up so I can pull the battery out for charging. A little more elegant than hanging it on the fork.
sturiegel#21 • 11/28/14 @ 11:31 AM
Woohoo, parts! Build! Thrash! Ride!
With the half-link in place, the chain is just long enough to wrap properly. The tensioner is still a little hinky. I need to tweak it a little so it rides true.
Not quite finished, but finished enough to ride. And gawd what fun! I haven't enjoyed anything so much since I was a wee sprog.
My brain bucket came in the mail, too, so I can keep what's left of my intellect.
Now if the city would pull its thumb out and plow my street, I could have some real fun.
duanerussell#22 • 11/28/14 @ 8:48 PM
Sweet! Will you be able to do early-morning rides without waking the neighborhood? Or, is the muffler sufficient to be tolerable?
sturiegel#23 • 11/29/14 @ 3:15 AM
This sure ain't a Harley. It's quiet enough to hold a normal conversation while it's running. Even at Full Nelly it won't wake anyone but a hard-core insomniac.
Pedaling is a bit awkward. Between the low seat, wide cranks and machinery in the way, it takes some getting used to. And you can pedal while it's going, to provide a little boost if needed.
The big seat and high bars make for comfortable riding. I was afraid the vibration would be unpleasant, but very little gets through. Overall it's quite civilized.
sturiegel#24 • 11/29/14 @ 12:02 PM
Now that it's running and riding, time to put the finishing touches on.
Picked up this lamp housing at Lowe's to give it a little more antique-bike flair.
Also adjusted the valves and replaced the Chinese spark plug with an NGK. Now it idles better and seems to have a bit more low-end grunt.
Rode around the block a few times and checked the temp. Cylinder temp was 180 degrees, which seems about right on a 40-degree day.
And ordered up a longer throttle cable and a speedometer.
guidobrothers#25 • 11/30/14 @ 4:18 AM
Stu: I know most bikers (bicyclists, that is) scoff at mirrors, but I find them indispensable. Any plans?
sturiegel#26 • 11/30/14 @ 4:36 AM
After riding it a bit, I find that I want one. The engine is just loud enough that you can't hear cars coming up behind you.
I used to have one that clips onto the side of my eyeglasses. Just a little thing, but it sure was effective. I think a bar-mounted mirror is going to vibrate too much to be useful.
Just weighed the bike. With a full tank, it comes it at 66 pounds. 28 front, 38 rear.
sturiegel#27 • 11/30/14 @ 9:03 AM
Today was Carburetion Day. Since it's 55 degrees outside, I played with the mixture and got it running very sweetly. It wanted about a half-turn out. I'm sure the EPA will come down on me now, as the exhaust now smells like exhaust.
And of course, another quick spin around the neighborhood. Nobody woke up.
bobthurston#28 • 11/30/14 @ 7:25 PM
Stu,
This is so cool!
Right now wondering how (if) you plan to transport it? Sounds a little heavy for your normal bike rack (rear or top), and maybe I wouldn't be sticking it inside my station wagon . . . maybe you have a truck to haul it with, or is there a kit to build a trailer to haul it?
sturiegel#29 • 12/1/14 @ 3:30 AM
That's going to be a bit of a problem. The rack that I have will hit the carb. But I do have a truck it will fit in.
Admin#30 • 12/1/14 @ 3:41 AM
Just have to have the right rack. My rack holds 4 bikes, which is definitely more that 66 pounds.
bobthurston#31 • 12/1/14 @ 8:39 AM
Mark
Is that a rack that sits on a trailer hitch arrangement?
Admin#32 • 12/1/14 @ 10:32 AM
Yes. Trailer hitch option was the best for me because it works with any vehicle with a trailer hitch.
sturiegel#33 • 12/1/14 @ 4:11 PM
And since it's cold again, that's a good excuse to go back and re-do some of the stuff that was good enough to test ride but not good enough for everyday use. One of those things was the throttle cable, which is too short to lie properly, and binds the bars when I turn.
So I found a scooter cable on Amazon. In addition to being 6 inches longer, it's much better made, with a Teflon sleeve. So now the throttle is muy smooth.
Cables route much more naturally now. You can also see that I went against my religion and sacrificed style for performance in the lighting department.
I also put a longer front brake cable on, recycling the old throttle cable. Now all the cables on the bike are new. And smooth as butter.
Since I had the throttle apart anyway, I stripped off the horrible plating and gave it a spritz of flat back. Much better.
Quiz time! What do Ferraris, Chrysler Hemis and my sickle have in common (besides being ultimate performance machines, that's a given)?
Wrinkle-finish valve covers, of course!
bobthurston#34 • 12/1/14 @ 5:02 PM
Oh my gosh, first time I noticed those handlebars! Where in the world did you find those?
sturiegel#35 • 12/1/14 @ 5:41 PM
I got the bars from my local bike shop. They're from Electra Cruiser.
I was pleasantly surprised at the quality of the chrome. For 20 bucks you don't expect show quality, but these are very nice indeed.
You'll need longer cables, too.
sturiegel#36 • 12/2/14 @ 1:23 PM
More progress:
My old brake pads were old enough to vote, and voted for early retirement. They were good enough for pedal power, but not really up to the task of slowing down 300 pounds from 30 mph. And brake-pad technology seems to have improved quite a bit. I don't think the old ones were ever this good. So now I know I can stop the beast in a hurry if need be.
Then I got to thinking about cooling. I noticed that while the engine is running, the fan pushes air around the back and forward thru the fins. Which is fine on a pressure washer or leaf blower, but damn few of those ever get up to 30 mph. And at speed the air coming in the front will meet the air coming around the back, and stall out the airflow.
So I cut away the side shield, figuring that the fan can take care of the right side and the back of the engine, while airflow does for the other two sides. It should be an improvement. If not, I have plenty of sheetmetal and can always make another one. Time and miles will tell.
sturiegel#37 • 12/3/14 @ 12:48 PM
The fun and games never stop around here:
My chain guard broke where I drilled it for the hose clamp to the frame (too close to the edge I guess), so I brazed on a short length of wire and re-clamped it. Also gave it a coat of paint.
After that was finished up, I got a package:
My "old school" speedometer, as promised, looks the business. It's not the precision instrument that a JR counter is, but 1) I still can't find the damn thing and 2) I've only participated in one actual measurement. So it's not like I really need one on there.
Not as promised, however, was the work needed to actually fit the thing:
The fork hit the gear housing and wouldn't let me get the wheel all the way into the dropouts. So I hacked away at the housing, which has plenty of material. Gave the cable a liberal coat of grease just on general principles and went for a ride.
At half throttle (which I'm limited to for the first two tanks) I'm hitting 22 mph. And it feels a lot faster. The new brakes work really well, so I'm getting some confidence in this thing.
All I'm waiting on now is a mirror (helmet-mount) and warm weather.
bobthurston#38 • 12/3/14 @ 2:18 PM
Stu,
This is way better than those TV shows where they rebuild a motorcycle or a house, great stuff!
Please get in a lot of practice, especially on turns, before you use full throttle! Based on motorcycling friends, some of whom learned the hard way.
Another caution, I know someone who broke his arm while riding his powered bike. He had to stop suddenly on gravel and somehow the heavy bike came down on top of him. So practice stopping also. Just saying.
sturiegel#39 • 12/4/14 @ 9:57 AM
Duly noted. The more I ride, the better it feels. The first couple runs were a little wobbly, but it's like riding a bike, ya know?
The rear weight bias helps with braking. I haven't weighed it with me on (kinda hard to do) but the balance is probably close to the unladen 40/60ish bias.
Rode a mile each way to the pizza shop for lunch. No mechanical issues and I can't stop smiling.
40 degrees outside, engine runs at 168 degrees. It's starting to free up, and half throttle is now good for 26 mph.
sturiegel#40 • 12/5/14 @ 6:38 AM
quote:
Originally posted by Bob Thurston: This is way better than those TV shows where they rebuild a motorcycle or a house, great stuff!
Here's the TV version:
DISASTER! The chain guard is broken and the bike has to be ready for the big reveal tomorrow! A last-minute mad thrash ensues and tempers flare as the crew struggles to get it done! Paul Senior is not happy!
YOU STUPID I TOLD YOU TO HEAT TREAT IT! YOUSE NEVER LISTEN! ARGH! I JUST FORGOT, DAD! JEEZ LIGHTEN UP WILLYA! ARGH!
The more relaxed, literary version:
Well, apparently I was mistaken about the "no mechanical issues" part of yesterday's ride. My chain-guard stay broke right where it screws into the cylinder. Vibration? Frame flexing? Who knows. That's what I get for not heat-treating it.
So here's the Mk II "floater" version. Instead of a solid link, I made a new end, sleeved with brake line. That way the two pieces aren't rigidly attached, but the guard is still held in place. Bunged it in cold water after brazing, so it should be okay. Will it be? Who knows.
Funny that the simplest part is giving me the most trouble, but it's nice to know I can just throw it away if I get tired of mucking with it.
Plug reading:
New NGK plug on the right, after yesterday's ride. Color is just about perfect. Factory plug on the left looks like it was running super lean. So that's good news.
My helmet-mounted mirror isn't going to do the job. It sits too close to my eye for me to focus on anything, even at full extension, and it looks goofy besides. Ordered up a bar-mount mirror.
If I can get the stupid chain guard sorted, we can call it done. More testing needed.
sturiegel#41 • 12/6/14 @ 8:16 AM
Decided to brave the 40-degree weather and rode 5 miles yesterday to test the new chain-guard mount, and to see if 49cc is enough to haul my big butt up the steep hill in the park. Success on both counts, although there was a little clutch slip on the steepest part.
So I'm going to call it done now... oh, wait, I'm not. Of course not.
Decided to crack open the primary drive and see what's in there:
A little double-row roller chain, swimming in grease. And actual bearings supporting the shafts. Good deal. And now that the cover's off, let's do something about that as-cast finish.
This is where we start. Finish as cast is reasonably smooth and should take a polish nicely.
<SNIP> Skipping over the intermediate steps of 80, 120, 220, 320, and first polish...
Mother's polish and Powerball. All it needs now is wax and final installation:
And there you have it. One polished primary cover.
Submitted without comment.
sturiegel#42 • 12/13/14 @ 6:01 AM
Minor update that turned into a much bigger project than it should have:
I finally have a mirror, so I can see all the people coming up from behind trying to kill me. But somebody who designs bike mirrors needs a good smacking:
Apparently, using a 3/8 rod in a 7/16 hole is considered "tight enough" and I'm here to tell ya, it ain't. I started to put this on as a quick project before dinner. Didn't know I'd have to re-engineer the bloody thing. Started by grinding a couple of flats on the shaft, so it wouldn't rotate when the sleeve was tightened down. Still not enough, way too much movement. So as you can see, I put a brass sleeve on it. Now the mirror stays put.
The rest of the mirror seems to be well made. I have no idea why they thought this sloppy fit was a good idea. End rant.
Also put in a fuel filter (smallest one I could find is still huge for this application). There's a screen in the tank valve, but that's only good enough to keep the big chunks of rust out. So a filter gives me a bit of carb insurance, as well as a visual indicator that fuel has gotten down to an "oh crap" level.
Note that the valve cover is missing. I got a plan for that.
duanerussell#43 • 12/13/14 @ 8:52 PM
Stu, I just want to say that it is nice following your project! Thanks for the pics and colorful commentary.
sturiegel#44 • 12/27/14 @ 7:24 AM
Happy Christmas everyone!
Well, it was for me. I got a GPS mount for my handlebars:
(which I had to chop up a little to make it work. Garmin has a fairly vague notion about what fits their older products.) But now I know where I am, and can verify that the speedo is somewhat accurate.
Also wrapped the header with thermal wrap. This is supposed to keep exhaust heat in to improve scavenging and make mucho power. I guess it works, as there's only a 2-degree drop between the head and muffler. So that's nice. But I installed it so I can stop burning myself.
Went for another ride as it's ridiculously warm for December. The thermal wrap must work as we're now up to 28 mph at half throttle.
sturiegel#45 • 1/1/15 @ 1:50 PM
Ah, New Year's Day. A time for contemplation, reflection... and building stuff.
I decided that I want some real motorsickle-type foot pegs, so I went shopping. Strangely, nobody seems to sell foot pegs with a bicycle frame mount. Nobody except Lowe's plumbing dept.
Once I measured the frame (1.25 inches), I selected a tee that would fit. In this case 1 inch, as pipe is measured on the ID of the pipe. A little creative butchery (above) and it was ready to sit on the old water-bottle mount. The rest was just plumbing:
I had to play with lengths and angles so the pegs would miss the pedals and front wheel, while putting my feet where I want them. Now I can sit back a little, more relaxed than with feet on the pedals.
A Wild One, indeed.
bobthurston#46 • 1/1/15 @ 7:56 PM
Foot pegs are brilliant!
This query from Safety Committee: would you consider putting traps on those bars to keep feet from sliding too far forward? Just a question; there may be good reasons not to do something like that.
peteriegel#47 • 1/2/15 @ 1:31 AM
Have you considered routing the exhaust through the new footpegs for cozy comfort in the cold?
sturiegel#48 • 1/2/15 @ 3:18 AM
quote:
Originally posted by Bob Thurston: Foot pegs are brilliant!
This query from Safety Committee: would you consider putting traps on those bars to keep feet from sliding too far forward? Just a question; there may be good reasons not to do something like that.
Gravity and the heel of my shoe seems to keep my feet where they belong. Haven't test ridden with them yet (cold) but I don't see traps as necessary or desirable. A straight peg lets me put my foot down when needed.
As for cozy comfort, the exhaust pipe runs at 400 degrees. I'd probably end up buying a lot of shoes.
sturiegel#49 • 2/24/15 @ 1:30 PM
So, remember back in December when I said something about how I have a plan for the valve cover?
That plan has come together:
Thanks to knowing a certain guy with a Haas CNC mill in his garage who puts up with my crap, I've got myself a deluxe California-hot-rod style valve cover. I guess I can justify it by saying there's less valve noise now, but it's really for looks. And on that level, it succeeds brilliantly.
bobthurston#50 • 2/25/15 @ 6:30 AM
Sweet!
guidobrothers#51 • 4/30/15 @ 4:01 AM
Well, it's (sort of) spring here in New England and we've been riding up and down hills (1 is 11%) since the snow, rain and cold inched its way out of here. All these hills reminded me of the motor bike projects that got put on temporary hold by similar conditions in the great mid-west. Beside the fancy chrome looking valve cover, are there any new developments or news?
sturiegel#52 • 4/30/15 @ 4:29 AM
No new developments to speak of. Went for a ride around the neighborhood the other day since it seemed warm, but at 20-25 mph it's not THAT warm. I did hit 30 mph on a level road, which is about as fast as I'd want. For a speedy bike, choose one with a longer wheelbase like dad's cruiser.
I noticed it doesn't like hot restarts at all; needs to cool off a bit before it will start easily.
Also, I took the foot pegs off. Between the pedals hitting my legs as they spun, front wheel hitting my feet on turns, and general awkwardness of going from pegs to pedals, it seemed safer to ditch 'em.
When the city re-paved the main road out of the neighborhood, they added bike lanes, so I have a nice smooth superhighway to the post office.
sturiegel#53 • 5/2/15 @ 11:19 AM
Performance update:
4 miles each way to the pharmacy, up and down a 6% grade going thru the park. Without pedaling I made 15 mph up the grade at near full throttle. Cylinder temp after the climb was 220. Hotter than I'd like but still acceptable.
A quick carb adjustment put paid to the hot-restart problem.
Took the sidewalk to avoid the worst of the traffic, so the last half-mile went by at 10-12 mph. The rest was at 25 mph. Made it back home a little faster than if I'd driven (I scoff at your stoplights).
Hands are a bit tingly from the vibration, but the seat is doing its job admirably.
sturiegel#54 • 9/10/15 @ 9:04 AM
48-mile update:
Some time ago I started having a problem with the (engine) drive chain popping off at inopportune times (is there a good time?) and also noticed my spiffy high-performance air filter was getting squashed against the frame. So obviously the engine moved somehow (that "how" part's not so obvious). Time to bust out the wrenches and pretty much start over. This is the result:
The engine now sits about an inch higher, and an inch forward of its former position. This presented several problems (and solutions) and solved some others.
Problem #1: Now the stupid chain is too short. Will I have to order another master link? No. I had enough parts with the half-link's hardware to solve this one. Forgot how much fun it is to bust the chain apart (none whatsoever).
Problem #2: The chain gooped up my whitewall.
Fortunately you can still buy Bleche-Wite.
Problem #3: Can't turn on the fuel feed because the lever hits the spark plug now. Solution: move the tank forward. This also gives me some "ball room" when stopped. Had to lose the headlight battery, which I'll think about later. So far I haven't ridden at night. People are goofy enough during the day.
Pictured: ballroom. Also note that I can actually get the dipstick and drain plug out.
Problem #4, the big one: Got everything installed and engine running, but I can't turn the choke off. The lever hits the top tube. So start over and reposition everything again? or MacGyver workaround? Hell there's always a Plan B. In this case, break off the choke lever, drill a hole in the shaft and make a new lever from safety wire.
MacGyver's choke.
Since there's no longer any friction to hold the choke in either position, I made a hook at the end to hang on the throttle cable. This holds the choke full open once the engine is running. I may revisit this later once the shame of this crude solution catches up to me.
There are still a few minor things to do. Oil is puking out the breather at the back rather than being sucked into the carb, so a bit of sealer will go in. Chain tensioner could use a tweak as it's now in a new position and the angle is a bit off. But neither of those will "red-line" it.
As a bonus, my left foot no longer hits the transmission when pedaling.
sturiegel#55 • 10/23/15 @ 3:11 PM
New Fall Colors!
After riding for a while, I've determined that while the bike works, there were still a few things to be worked out. I set about eliminating all the wire wraps and cable ties holding things to the frame, or as many as I reasonably could. Chief among them were the brake noodle (automotive brake line) on the top tube and the ties holding the throttle cable.
Now the brake line is brazed to the tube, and the throttle cable clipped on with short tube sections. The brazing burned off the paint, so a respray was in order. International Safety Orange to match the lettering on the tank.
While I was mutilating the frame, I drilled a couple holes to run the power leads for the headlight inside the tube, protected with grommets. I still have to terminate one end. This way the battery is behind the seat post, out of sight and out of mind.
Still a couple small things to take care of, but I like the way it's looking now.
bobthurston#56 • 10/23/15 @ 6:16 PM
Kind of nervy, drilling a hole right there at that top joint.
(Feel free to dismiss this remark as a petty comment stemming from awe and envy!)
sturiegel#57 • 7/14/16 @ 9:12 AM
Almost 9 months since the last update. What a slacker.
Since teaching myself to MIG weld, there's (almost) no end to the things I can do on this sucker. (I can't weld onto the frame since that's chrome-moly and you have to TIG that stuff). Since I changed the exhaust tips on the truck, I had these big stainless (for a given value thereof) resonators laying around. Picked up a length of 3/4-inch conduit at Lowe's, did a little bending and a little welding, and now this thing has a rumble to it. Sounds a lot meaner than it is, but that counts for something, right?
Made a chain guard to keep my pants clean. Steel shelving supports already have speed holes, so that's what I used.
Made a support for the new Chinese headlight (fits chopper bobber Harley Davidson) and installed a 2-way switch. Low is pert near useless, but high lights things up nicely.
The headlight alluded to earlier.
And while I was painting things, I gave the brain bucket a makeover. Unfortunately it doesn't help with the "looking like a goober" part of helmet-wearing but it's a step in the right direction.
Forgot to take a pic of the fenders. Later, I promise.
Next step is a new front brake. 300 pounds of bike and rider plus 30 miles an hour is more than the rim brakes can handle. But since I'd have to change the fork to install a disc brake, I'm going with a Sturmey-Archer 90mm drum. Which will give me a chance to learn how to lace wheels. Stay tuned for that fun-fest.
pastmember#58 • 7/14/16 @ 4:29 PM
The entertaining odyssey continues. Fun reading.
Thanks, Stu.
sturiegel#59 • 7/21/16 @ 6:34 AM
Give me a brake...
Specifically, a great big drum brake. I selected this because I wouldn't have to change the fork for a disc brake. But then, I changed not only the fork, but the whole damn frame:
That's a brand-spanking Electra Cruiser One, single-speed coaster brake. Selected because it's six inches longer than the Hardrock, and the seat post sits 3 inches lower. Note that the pedals are set forward as well. Should make a good conversion.
It ain't all roses, however:
The brake hub's instructions tell me to select a brake-lever clip. Well they only gave me one, and it's far too small to fit the Electra's fat fork. So I bent up some steel and welded a tab on to hold the arm.
While I had the welder warmed up, I had to extend the engine mounting plate. Still need to drill holes for the engine, but that will come after the wheel is made up and mounted.
Wait, your new bike didn't come with a rear wheel?
Well yeah, it did, but I can't resist changing things. Low-end bike parts are cheap, and fun, so I'm downsizing to a 24-inch rear, which allows me to use a low-pressure 24x3.0 tire for a smooth ride. You can see the difference in diameter from the 26x2.125 black tire behind it. Smaller diameter, better acceleration and less stress on the engine.
The other snafu I encountered was the bottom bracket. The bike comes with an American-standard crankset (like an old Schwinn) and my wide 3-piece crank is Euro standard. Fortunately adapters are available so that's sorted.
I'm at a bit of a stopping point here, waiting for things to show up. But I expect to be back on the road in a month or less. Stay tuned.
duanerussell#60 • 7/21/16 @ 2:44 PM
Hobbies sure can get expensive, both in cash, and time.
sturiegel#61 • 7/26/16 @ 7:06 AM
quote:
Originally posted by Duane Russell: Hobbies sure can get expensive, both in cash, and time.
Fortunately, I am blessed with a sufficiency of both.
Now we see some real progress. We can add "painting a spoked wheel" to the list of things I don't want to do again, but the results are worth it. Front wheel is a place-holder. Even barefoot, I can get both feet flat on the ground. Tank is positioned for maximum ballroom. As we said in the 1970's, it's looking boss.
With the rear wheel on, I can see where the chain wants to run and position the engine appropriately. New holes drilled in the engine plate, which is now in the paint booth.
My position on preserved immature cucumbers has not changed.
Leftovers get re-cycled. Get it? Me so funny.
sturiegel#62 • 7/27/16 @ 9:48 AM
Progress!
The engine is in, plumbed, wired and running. Made a new exhaust today.
I needed a bendy part to get over to the right side. Started getting out the torch and then remembered the old handlebar I had laying around. Does the trick nicely. The muffler now clamps on, so I can actually get it off without cutting either the exhaust or the chain.
More to come, stay tuned!
sturiegel#63 • 7/28/16 @ 12:20 PM
And more progress!
It is now provisionally alive. Which means it runs and drives, but has no front brake (waiting on spokes so I can build the front wheel). The coaster brake is capable of locking the rear wheel, which is more than I can say for the old bike's rim brakes.
Spiffy aluminum bottom-bracket adapter (US to Euro). Would have been nice if the motorbike-parts people would have shipped a US-spec wide crank set like they show in the catalog, mumble mumble...
Battery for the headlight. There's an LED blinky light on the seat post that has its own battery.
Rear fender, banged out to the proper width to cover the tire
Black krackle paint on the engine cover. I love this stuff.
And yeah, that fuel line really should be orange. Little stuff like that bugs me more than it should.
sturiegel#64 • 7/30/16 @ 12:40 PM
It's all over but the crying:
My spokes arrived and I managed to get the front wheel built. Guys who know how to build wheels will tell you that building wheels is the mark of the Elite Bike Mechanic, but that's what you'd expect them to say. What they don't tell you is that it ain't that hard, once you know the trick.
They also say you need the Elite Bike Mechanic truing stand so you don't build a wobbly wheel. But you can make one out of wood in about 10 minutes. Maybe I'm an Elite Carpenter, too.
The hub brakes work much better than the old rim brakes. I can stop in about 2/3 of the distance than before.
At this point it's pretty much done. There's still some fiddling to do, and maybe a chain guard.
Top speed is down from before. I'm at about 24 mph because of the smaller rear wheel, and the low-pressure tire has more rolling resistance. Plus the bike is heavier. But if I was after speed, I'd put one of those 212cc Predator engines in, with a golf-cart transmission.
bobthurston#65 • 7/30/16 @ 1:10 PM
It's great stuff and a real treat to get to see so many of the details. I'll be interested in hearing how it rides and measures. Maybe it will ride a nice straight line even going up steep hills?!
I think a nice orange bike helmet would make up for the black fuel line.
Keep up the good work and good reporting!
sturiegel#66 • 8/21/16 @ 3:56 AM
Time for an update, and some Mel Brooks Mohel humor.
It's the latest rage, the ladies love it! That's right, I decided to "soicumsize" my muffler. Like so:
The bit I cut off is on the floor. That style of tip is called a slash cut, and it's accurately named, especially if you're not paying attention.
Yeah, that hurt. So the pipe is cut back and filed smooth so it doesn't happen again.
Saturday I turned up at Mike's seminar and met some of you guys again, and some for the first time. And Mike gifted me his 4-stroke, which he couldn't get to work properly. I noticed all the castings are different from mine, though the carb is the same.
Another update is coming, so stay tuned!
sturiegel#67 • 8/22/16 @ 1:12 PM
For a while now, I've had a problem with the engine barfing oil out the ventilation hole. The harder I ran her, the more she'd barf. So I put a plan together, then Mike cocked it up by giving me an engine that (so far) doesn't barf anyway.
But a plan is a plan, and so I executed the Puke Mitigation System (PMS).
The crux of the problem is that the engine's just hammered. Oil shouldn't look like this:
That's about 4 hours of running, and the oil is chock-full of aluminum. No bueno.
Step one was to screw the engine to the table and make sure it runs. Then switch over all the bits I want to re-use, and catalog the differences while I'm at it.
One difference is that the clutch housing is shallower, so the bell rubs on the crankshaft. Some washers spaced it out just enough.
Then it came time for serious PMS installation.
I started by restricting the inlet side. Instead of a 10mm hole open to the outside, I cut slots in this tube. The tube is jammed all the way into the crankcase, so the slots (which are at right angles to the oil spray) are the sole source of air getting out.
New restricted pipe vs. old unrestricted.
Air that gets out, goes to a bit of AN hose that I had leftover from another project...
And down to an air-compressor oil separator. This should still work even with drastically less air than it's designed for.
Pure clean air is filtered before release.
I do realize that this whole PMS business is massive overkill, but I like massive overkill.
sturiegel#68 • 9/1/16 @ 8:04 AM
The adventure continues...
Dissecting the old engine (which shares no parts with the new, despite being drawn from the same Honda engine) I noticed this chamber above the crankcase:
The small hole on the right side of the chamber communicates with the crankcase proper via a flapper valve (removed). The chamber's outlet on the left goes to the atmosphere (or the PMS). My previous breather was a simple tube going up to the air cleaner, about 4 inches higher than the chamber's exit. This tube managed to fill up with oil and puke it into the air cleaner, necessitating the last post.
As you can surmise, there must have been one hell of a lot of blowby to get oil up into the chamber and up the tube to the air cleaner. So I'm really glad to have that new engine, which so far hasn't puked any oil at all.
I rode to the post office, 2 miles each way, but had an incident on the return trip. The chain tensioner wants to go walkabout, forward on the chainstay, and loses tension enough that the chain then jumps. So I went to work on that:
Problem is that the paint is just too glossy for the tensioner to stay in place. So I wrapped a bit of leaky old inner tube around the chainstay, with a bit of contact cement to keep it in place, and reinstalled the tensioner. The spring should help, too. If this doesn't work I'll weld the little booger in place.
Hey, speaking of welding:
This is a vertical brace made from steel strap and some exhaust pipe. It keeps the engine from rocking side to side. The exhaust pipe wraps around the bottom bracket, and a hose clamp keeps it tight.
In other news, the high-speed misfire is gone. I changed the magneto after noticing the one that came with the new engine is larger and heavier (meaning it's got more copper in it). Now I've got a stronger idle, and the engine pulls nice and hard all the way up to 32 mph.
Now all I need is a Marlon Brando leather jacket.
bobthurston#69 • 9/1/16 @ 8:35 AM
Thanks for the ongoing saga, Stu! It was good to see you in Cuyahoga Falls and hope to see the actual bike one day.
Can you explain about gearing? Does this run on one speed or is there a way you shift gears? (Sorry if you already explained and I wasn't paying enough 'tension!)
sturiegel#70 • 9/2/16 @ 3:42 AM
Bob, the bike runs a single-speed primary drive at 5:1, with a further 4:1 reduction in the chain to the rear wheel, so overall it's 20:1. This means the engine runs at about 6500 rpm at 30 mph. A multi-speed gearbox would yield a higher top speed if you're feeling really frisky.
Mike gave me this engine because it wouldn't work for him; I determined that was because it came with a 3:1 primary for a 12:1 overall ratio. With a 26-inch wheel, that would yield a top speed around 55 mph, if the engine's 2 hp could overcome aero drag at that speed. But the high gearing killed Mike's clutch. It's like trying to start your car off in third gear. You would have to pedal up to 15 mph before revving the engine.
I don't know where he got a 3:1 primary. Maybe it's meant for a BMX bike, or something else with a very small wheel.
For multi-speed bikes, there is a jackshaft kit which does away with the chain from the engine to the wheel, and uses the bike's chain and derailleur. I don't know exactly how those work, or if you have to pedal like a madman to keep up.
sturiegel#71 • 10/13/16 @ 5:17 AM
Cue the "sad trombone" sound effect.
What was supposed to be a quick run to the drugstore turned into a troubleshooting and repair session rather quickly. Cruising at 30 mph, I suddenly lost drive.
Since the clutch bell had failed once, I figured my repair had failed, and pulled the primary drive off. I did not expect to see this:
Top: sheared input shaft. Bottom: Booger-welded clutch bell still holding strong.
Yeah, pretty sure that's supposed to be one piece. Don't think I can weld that (though I may try just on general principles). A new shaft costs a whopping $15.95, and a new clutch bell a further $11.95, so no big deal there.
I suspect the shaft broke due to all the whacking it took getting the clutch bell off before I figured out that it simply unscrews, although it was threadlocked pretty thoroughly. Anyway, new parts are on the way and I should be back on the road soon.
More worrying is the performance of the coaster brake and pedal drive. As I pedaled home, there was a lot of slipping. Adjustment has not improved things; it seems the drive surface of the wheel has had all it can stand.
I've been lurking on motorbike forums and it seems this is a common problem with coaster-brake hubs at high speeds. I am seeking an alternative, and with winter coming I'll have plenty of time to wrench on it and figure it out.
Finally, I bought a new brain bucket:
This is actually a snowboarding helmet, but it has twice as much padding and a better fit than my old one. If it can protect a downhill skier at 60 mph it'll protect my melon at half that speed, and unlike bike helmets it doesn't look like a permanent bad-hair day.
Stay tuned for further developments.
bobthurston#72 • 10/14/16 @ 4:20 AM
Stu, It may have been the whacking as you say, but I'm surprised to see such a spindly-sized drive shaft. Maybe I'm missing something on that.
Good luck on the other issues!
sturiegel#73 • 10/15/16 @ 2:26 AM
Bob, I think this is a case of re-purposing without re-engineering. The primary drive comes from a Chinese scooter, which uses a 10- or 12-inch wheel. The fact that the part is readily available tells me that mine isn't the first to fail. I suspect the ultimate cause lies in the material; Chinese steel isn't exactly famous for durability. We will see how long the replacement lasts.
The coaster brake is being replaced by a freewheel hub and external drum brake. The freewheel has a thread-on adapter to accept the engine-drive sprocket, so I can do away with the rag joint holding the sprocket on, and spread the load over all 36 spokes. Ultimately it will be an improvement, but it means I get to re-lace the rear wheel. Fun times.
bobthurston#74 • 10/15/16 @ 8:07 PM
When I started having trouble finding French-sized parts for my Peugeot, shops would put in Chinese replacement parts. They kept breaking, so I got a new bike. I still have the frame, one of these days I'd like to convert it to a fixie/single gear bike.
sturiegel#75 • 10/20/16 @ 9:14 AM
About time we had an update, yes? Got a big pile of parts that kinda-sorta work together, beat on them for a while and got everything to play nice.
New rear brake installed, which works better than anticipated at least at pedalling speeds. I had to smash, bash and grind the housing to make it fit the frame, and tweak the linkage to clear the chain. You're meant to run the sprocket facing the other way, but if I did that I'd have to move the engine over, and then the chain would rub the tire. So a little bending was in order, kind of typical for this build, making things work.
Example:
The brake's pivot bolt wants to rub the sprocket. I discouraged it with a file. The new sprocket is 50 teeth, up from 44, so I'll sacrifice a little speed and gain pulling power, a fair trade.
The sprocket mounts to a freewheel (reverse thread) with five bolts and no rag joint. The pedal sprocket has a freewheel, too.
The bigger sprocket meant I had to embiggen the chain. Kind of janky, but it should work okay.
Now this is the kind of thing that really bugs me:
Each Bum? Really? Was another B too expensive for ya, tire-mold guy?
Front tire is a matching 26-inch Beach Bum. so both ends roll on low-pressure rubber now. At least they spelled it right on the black graphics.
Went for a pedal and it still slips. WTF?
This could have been the problem all along. The crankshaft spins inside the sprocket. Gonna have to weld that.
sturiegel#76 • 10/21/16 @ 9:22 AM
Bzzt, bzzt.
Chainwheel is now secure. I'd go for a ride, but it's pouring rain.