Last week I measured a course that started on a HS track. The course went through a gate in the fence surrounding the track, and the organizers were worried the gate might be closed on weekends, so I measured back from a point on the course after the gate to a point in the parking lot that made the same distance. So, the course has a primary (track) and backup (parking lot) start - the non-common distance is about 140m.
My question is, when making the map, should I a.) indicate both starts and issue one certification number
b.) show both starts, and give each "course" its own number.
c.) treat each course as unique, issuing a separate cert and number for each, with separate map.
I know from a practical standpoint I am going to provide the RD with a map showing BOTH starts - no sense in him having to worry about finding 2 maps to prepare for the race.
Alternate starts
two certificates
But not necessarily two maps, correct? I have often been in this same quandary.
The maps are slightly different as the starts aren't the same. You could have the same map for both noting which is the start matching the certification number.
Also, the drop may be different and the separation has to be different.
I hope Jim submits his courses this time!
Also, the drop may be different and the separation has to be different.
I hope Jim submits his courses this time!
Well, the separation wouldn't necessarily have to be different - start A could be 130m east of the finish, and start B 130m west. Although in this case, you're right, the alternate start is much closer. In fact, I forgot about that and will have to take a ride over to measure the difference.
Jim,
Can't you get the separation from Google Earth?
Can't you get the separation from Google Earth?
True Bob. This course is literally 2 miles from my house.