Measurement Forum Archive

Read-only historical archive of measure.infopop.cc

Ways to handle adjusted courses & late submission

#1 • 10/27/12 @ 7:45 AM
Here is an email I received from Bernie Conway(see below). The first idea expressed was discussed by the RRTC and our conclusion was to use the date of the submission of the data.
The 2nd idea expressed is handled in a similar way by us. However, we don't record the number of times a course is adjusted and use a different ID#.


Gene,

The 2012 IAAF-AIMS Meeting in Kavarna, Bulgaria saw a few changes to the IAAF certification numbering which I have also adopted for Athletics Canada and you may want to consider.

The first is that the year in the certification number is the year that the course was measured. As an example if a course was measured in 2010 but not certified until 2012 the 2010 would be the year showing up in the certification number.

The second change is that if a race undergoes a partial change (large or smaill) and only part of the course is measured, then the new certificate will retain the original certification number but an "a" will appear after the number to indicate a change to the course. For example I measured a 10 km course in 2009 (ON-2009-160-BDC). Last week I measured a new finish from the old 9 km mark, the rest of the course did not change. I sent a new certificate ON-2009-160a-BDC to the Race Director. If another change occurs I can use "b" and then "c" if needed.

These changes enable me to keep tabs on how many years before the course needs to be recertified by an overall ride once the 5 (IAAF) or 10 (Athletics Canada) year limit has been reached. It also allows me to place the new certificate in the same file folder as the original. Finally it allows me a more accurate tally of the number of road races in existance.

It looks like measuring is finished here until Spring. The temperature is in the single digits Celcius during the day and the weather man is indicating rain with the possibility of snow. If you need a measurer for some warm location think of me. Best of health.


Bernie
#2 • 10/27/12 @ 12:51 PM
I think the way we keep track of the number of changes is by how often they show in the database. While I see some value of adding the "a", "b", etc, I don't know if our online db is set to allow that.

I see value in numbering as Bernie does, as we don't really know if a course is adjusted, or completely changed, just by looking at our db. A new cert number does not mean the entire course changed, nor does it necessarily mean the course was adjusted. If we are concerned with how many times a course is adjusted, we would need to use the "a", "b", etc. Otherwise, our system works well for us.
#3 • 10/27/12 @ 5:34 PM
We do know how many times a course has been adjusted by how many times it appears in the database with the same year of certification.
#4 • 10/29/12 @ 4:46 AM
I think that our current numbering for adjustments works well.

As for "late submissions:" when I measure a course, late in the year, for a race that will be held in the following year, I often hold the certificate until after the first of the year. This makes the expiration ten years from the first running.
#5 • 10/30/12 @ 1:27 PM
Ron,

The policy for placing a date on the certificate can be found at the following link:
http://usatf.org/Products-/-Se.../Effective-Date.aspx

Since you are the certifier in these cases the date you place is when you send the certificate to the next level not when you measure the course. However, this should be reasonably close to your submissions.

Now for others who review someones work please see the actual policy. It is clear that the date is not when the certificate is signed.
#6 • 10/31/12 @ 4:28 PM
There's not much that gets measured after November in New Hampshire. For that reason, if I measure a course in October for a race that won't be run until the following year, I date and submit the certificate to the next level after the first of the year.

The course doesn't change between measuring and submitting the certificate.
#7 • 11/4/12 @ 6:12 PM
Agree w/ Ron on this one.
#8 • 11/5/12 @ 5:33 AM
He is a certifier that measured the course and he is correct about his dating procedure. However, this is not correct for a certifier that reviews one's work. The effective date is the date the certifier receives the paperwork. We just shouldn't make our own rules that goes against the policy.
#9 • 11/5/12 @ 6:26 AM
Right, I meant just for certifier-measured courses.
#10 • 11/6/12 @ 4:20 AM
I understand the role of certifier in these situations and didn't imply that a certifier should delay certification for an application from another measurer.

However if a measurer were to ask about how to submit an application for a course under these same circumstances, I would suggest that the measurer submit the application after the first of the year.
#11 • 11/7/12 @ 7:54 PM
I used to assign certification numbers based on the year the course was measure. If it was measured in year X but not submitted until year X+1, I would give it a year X number until I received the first course measured in year X+1.

Now once I receive the first course submitted after the first of the year, regardless of exactly when it was measured, it gets the new year's number. At the end of last year I gave the same guidance that Ron gave, and when I woke up on New Year's Day, I had applications in my in-box.