Measurement Forum Archive

Read-only historical archive of measure.infopop.cc

J/O Counter glue failure

#1 • 5/28/07 @ 9:17 AM
Carol Kane purchased a J/O counter several years ago (I believe for the '04 women's marathon OT course validation ride). Within the last year, the glue holding the Veeder/Root counter to the gear simply gave out, and the counter came loose. She did a fix with hot glue, and it seems to have held well (photo below)
Has anyone else experienced a similar problem? I'd also be interested in Paul's comments, as I believe the biggest issue in making the counters was finding a special glue that would hold the counter to the Delrin gear drive shaft. Could it be that we had the answer sitting in our hot glue guns all the time?
#2 • 5/28/07 @ 9:42 AM
I solved my personal JO counter glue problem as seen below. It's not pretty, but I don't worry about the glue any more. "Oil Here" is left over from when I used the photo in a previous post.

#3 • 5/28/07 @ 1:29 PM
I've found no better all-purpose adhesive than Shoe Goo. It sticks to everything but Teflon.
#4 • 5/28/07 @ 4:08 PM
Pete that looks like you've recreated the original Jones counter, as produced by the NYRRC back in the day. I've got one of those myself; your solution is indeed a good "fail-safe" attachment method - not as neatly elegant as glue, but probably more peace of mind.