Read-Only Historical Archive — Posting and registration are permanently closed.
The following is posted by request of Paul Oerth
THE RACE EQUIPMENT COMPANY
PAUL OERTH
2455 UNION ST #412
SAN FRANCISCO, CA 94123
415-346-4165 PHONE
415-346-0621 FAX
poerth@aol.comThe Jones/Oerth “HANDLEBAR MOUNTED COUNTER” consists of three parts:
1. A Sprocket Gear
2. A Bracket Mounted Six Digit Counter
3. A Speedometer Cable
The Sprocket Gear is to be mounted on the front wheel of a bicycle between the wheel hub and the fork of the bike with the engagement prong of the sprocket gear engaging the wheel spokes of the bike.
The Bracket Mounted Five or Six Digit Counter is to be located near the center of the handlebar of the bike and positioned for convenient reading of the counter.
One end of the Speedometer Cable will be connected to the Sprocket Gear and the other end of the Cable will be connected to the Bracket Mounted Five or Six Digit Counter. The Cable can only be attached one way, i.e. the end that fits on the sprocket gear will not fit on the threaded Counter connector.
Here the handlebar-mounted counter is shown on Pete Riegel’s bike.
Here is the standard axle-mounted counterHandlebar-Mounted prices from Paul (revised February 12, 2007):
Handlebar Mounted units:
5 digit - $130 US, $140 foreign
6 digit - $135 US, $145 Foreign
Axle Mounted Units:
5 digit - $80 US, $90 Foreign
6 digit - $90 US, $100 Foreign
Amazing that it took 25 years to come up with that. Sure makes the old JO more attractive.
The proteges and bell electronic counters do an equivalent job to that of the six-digit handlebar Jones at less than 10% and 5% of the cost, respectively. Though I think it is a mistake to choose a counter on price alone, in my prejudiced opinion the electronic counters give superior performance especially as they have instant zeroing capability.
Should a measurer wish to remain loyal to his axle-mounted Jones, he can get the advantages of an electronic counter by using it in conjuction with his Jones.
The Protege Electonic counter have been approved with some initial restrictions. If you need to see what they are go to the RRTC.net Web site.
It's true that there are advantages for the Electronic Counters as there are with the JO counters. I feel it's not necessary to downplay either device for measuring. Both are good.
Hello to all people of this forum, I'm a new user of this forum.
I come frome Spain and I'm a Certified Measurement Course Circuits in Spain.
I would like to do some questions, the first one is where can I buy a "Jones Counters"?. In Spain haven't any place to buy its.
Te second is, Its possible to buy them from Spain?
And if this is possible, someone can help me to do it.
Thanks very much and sorry for my bad English.
Regards from Spain
Josep_M,
Look at the first post in this subject for details. You can get a Jones Counter only from Paul Oerth. He requires payment in advance.
Jones counters are not sold in shops anywhere. They are only available from Paul Oerth
Contact him at
poerth@aol.com
Thanks, Mr. Pete Riegel, I will tray to contact with him.
Tanks again from Spain.
Counter prices have been revised downward. See the original post above.
Hi Pete,
I'm glad I caught this here. I have now updated it on the USATF website at
http://www.usatf.org/events/courses/certification/tools.asp