Measurement Forum Archive

Read-only historical archive of measure.infopop.cc

Treadmill Marathons

#1 • 6/29/06 @ 7:07 PM
In light of a recent "world record" for a treadmill marathon set here in CT, Dave Monti of Race Results Weekly asks:

quote:
Do any of you have any evidence that Eric Blake actually ran a certified 42,195 meters on this treadmill, the internationally recognized distance for a standard marathon? Most treadmills are dreadfully inaccurate in terms of distance. Is there even a certification process for treadmills?


When I've seen these done, there is usually a surveyor's wheel affixed to the front handrail in such a way that it contacts the moving belt near the front of the machine. It seems this would allow it to bounce somewhat and lose contact - this could make the "course" long or short, I suppose.

I think the only truly accurate method would be to paint a stripe on the belt, then use a tape to measure the actual circumfrance of the belt, then figure out the distance mathematically.
#2 • 6/30/06 @ 2:52 AM
Jim,

Your method would work. Also, a calibrated bike could be used in conjunction with a stopwatch.

I've always wondered about those treadmill "records" and competitions, and how they assured fairness, but figured they were a sideshow anyway and didn't let things get in a twist.

All in all, a surveyor's wheel resting on the belt seems a pretty practical approach to the problem.
#3 • 7/1/06 @ 4:24 AM
A white stripe painted on the belt would allow a photocell to count belt revolutions, or if several stripes were used, parts of a revolution. This would be quite accurate once the interval was known. I don't think treadmill belts stretch very much.